Programming Avnet Spartan 3A FPGA Eval Board with Linux

I own a small FPGA Board by Avnet with a Spartan 3A FPGA on it. The board is nice, but unfortunately, the flash chips on the board aren't on the JTAG chain. Instead, there is a small PSoC microcontroller that lets you programm the flashes via UART. There is a Windows tool to perform that programming which is shipped with the board. Here's what I did to program the SPI configuration flash on Linux.

Via the FPGALibre site, I found a link to a tool called ASTriAEKiPro, which allows me to write to the FPGA SPI Configuration flash via UART and the PSoC microcontroller.

Compiling the tool is as simple as running this command:

$ make

To erase the SPI configuration flash, I used this command:

$ ./astriaekipro -p /dev/ttyACM0 -e
Avnet Spartan 3A Eval Kit Programmer v1.2.1
Copyright (c) 2009 Salvador E. Tropea 
Copyright (c) 2009 Instituto Nacional de Tecnolog�a Industrial
Embedded BPI server provided by Avnet Inc. http://www.em.avnet.com/

Erasing the memory, be patient (>1 minute) ...

To write a configuration to the SPI flash:

$ ./astriaekipro -p /dev/ttyACM0 -w \
  -b ~/sandbox/avnet_lpc/projects/13.3/avnet_lpc/avnet_i2c.bit 
Avnet Spartan 3A Eval Kit Programmer v1.2.1
Copyright (c) 2009 Salvador E. Tropea 
Copyright (c) 2009 Instituto Nacional de Tecnolog�a Industrial
Embedded BPI server provided by Avnet Inc. http://www.em.avnet.com/

Writing 235820 bytes to the serial flash, offset 0x0000000
Erasing: sector   3 (100.00 %)
Bytes written:   235820 (100.00 %)
All written!